The copper is the same as are large steel rose blank. The copper is 14 gauge just like the steel rose blanks. Any question please give Jim a call at (951) 654-5660

The  California Blacksmith Association spring conference has been canceled for know. The conference team is working on a new date and site.
Will update this post when new information is available.
If there are tools you like us to bring e-mail me at jriddle@msmw.com. Jim

A new item to the website is the mini rose blank cut from 20 gage steel, makes a rose about 2" or 50mm in diameter and uses 1/8" or 3 to 4mm rod stock for the stem. I use steel T.I.G. rod for the stem. Jim

These gear are replacement part for a manufacturing operation, 8 1/4" outside diameter  3" face wide 4 pitch gear teeth, 4" bore with 7/8" keyway and cut out for gear rack. Please note all U.S.A. made. Jim

This some of the parts to a kitchen island doors and frame for a display cabinet. Has a hidden hinge set, Size is 25" Tall X 20" Deep X 57" Wide. Jim

These hinges are made from 1" X 4 1/2" X 6" and 1" X 3" X 6", Machined down too 3/4" thick with a web thickness of 1/4". Last picture is how the hinge would assemble, with a 1" diameter barrel welded too each side respectfully.

We are holding our first sweepstakes.  All you have to do to enter is fill out our contact form and like our page on Facebook.  Pretty simple.  Rules are simple too . . . find out more here. One lucky winner will receive this 1" diameter, H13 tool steel, anvil punch. Sweepstakes end 10/31/15.